For those who don't have operable louvers, these elements can be added for decoration to fixed louver shutters. Capping prevents water from collecting on top of the shutter and seeping down into the joint where it could compromise the shutter. Upgrade to copper capping to really enhance the overall look of your shutters. Overlap rabbeting allows for functional shutters to overlap when closed. This treatment is frequently requested to provide an added degree of historical detail.
Beading is a decorative touch to add character. Elevate Your Custom Shutters If operable louver shutters have captured your interest, wait until you explore all the ways to make your exterior shutters truly unique in every way.
Recommended Steps to Hang Shutters Attach the hinges to the shutters first. Make sure the hinge is flush with the side of the shutter.
Using the hinge mounting screws, fasten the bottom hinge to the face of the shutter. Please Note: When mounting the hinge on the face of the shutter, mount the hinges on the side that will be hidden when the shutters are in the open position. Mounting the center hinge is critical.
Make sure the center screw is centered on the shutter. A reverse mount exterior strap hinge is configured to screw into the rear of the panel, making the exterior shutter hardware conspicuous when the panels are swung to either side. Shutter dogs , or other devices, are necessary to keep the shutters locked wide of the window. L-style shutter hinges are a modified version of the long horizontal strap hinge.
Also known as a New York style hinge, the L-shaped hinge can be used for narrow shutters, to achieve an improved pintle mounting location, or simply for visual preference. Vertical strap hinges are often employed when a third center support hinge is necessary and a divider rail is absent. Vertical strap exterior shutter hinges are less popular as a primary style than the horizontal strap and L-style hinges. Clarks Tip hinges surface mount with one leaf screwing to the outward portion of the casing and one to the front of the closed shutter panel.
These adjacent surfaces must be on the same plane. When open, the hinge is well hidden and fully clear of the window. They employ an ingenious design to dependably lock in an open position. A slight elevation of the shutter permits the panel to swing closed. The hinge can be separated by fully lifting the shutter side leaf from the pintle side mounted on the casing.
Less ornate edge mortise hinges are available for more contemporary applications. The pintle offset measures from the plate mounting surface to the cylindrical pivot point. The hinge offset dimension is from the shutter face to the same pivot point. Typically the hinge strap and pintle offsets are the same. Throw is equal to the sum of the strap and pintle offsets. Throw essentially defines the distance from the base of the pintle to the back of the shutter when open.
A larger throw is needed when the mounting surface is recessed behind the siding facade. Plate mount pintles adhere to flat wooden surfaces best.
Three or four screws secure the back plate in place.
0コメント